You are here

Share page with AddThis

TOP TIPS FOR WINTER FUNGICIDE APPLICATION

Application
05.12.2016
Sprayer set-up - Daniel Lightfoot
Sprayer set-up - Daniel Lightfoot

Early winter disease attacks can have devastating effects that will last right through to next spring and summer – resulting in lower player satisfaction and increased costs of renovation, explains Syngenta Business Manager, Daniel Lightfoot.

An effective Integrated Turf Management programme can minimise the potential, coupled to a proactive fungicide programme to see turf safely through risk periods. But to get the best results, attention to the Art of Application can make a significant difference.

Check your sprayer first – Accurate application starts with correct sprayer set-up. All sprayers should be maintained and inspected to the National Sprayer Testing Scheme (NSTS) standard – from November this year it will be a legal requirement. Furthermore, regular in-season inspection - including tyre pressure, hose condition, pressure regulation and nozzle condition etc. - could prevent problems or delays during applications.

Sprayer set-up - Check even tyre pressures

Tyres are a built in shock-absorber for the sprayer. Make sure they are even, and typically run at as low a pressure as recommended for the weight.

Sprayer set-up - NSTS test certification

New legislation means all mechanical sprayers require regular NSTS testing – but is good practice to avoid costly errors.

Calibrate and calculate – many operators are not comfortable or confident with sprayer calibration, but it should be a routine and simple process.

There’s a video to help you with sprayer calibration set-up and information on all the calculations required on the GreenCast website, or using the free Syngenta Turf App for smartphones.

Sprayer set-up - Nozzle check and calibration

Checking nozzles for wear and even output for accurate calibration should be a routine practice and will quickly pick up problems.

The two-step process should look to check the spray nozzle output for any given speed and operating pressure, and to check consistent nozzle output across the spray boom.

Always check calibration using a measuring cylinder, not a measuring jug – you need to be accurate.

If any individual nozzle is showing a +/- 5% difference from the average attributed to wear, the whole set should be replaced.

Sprayer set-up - Speed check for sprayer calibration

Accurate calibration includes checking the speed of the sprayer and knowing precisely the size of the area being sprayed.

As a useful guide, you can check the accuracy of your forward speed during spraying using one of the GPS apps available for smartphones.

Set the right height – Most nozzles are designed to work best at a height of 50cm from the target – with limited flexibility. Too low and the spray pattern uniformity can be affected – typically seen as stripes following fertiliser or iron application; too high and spray drift quickly becomes a serious problem.

The Syngenta XC Nozzle also works best at 50cm, but is designed to give far greater flexibility. They will still deliver a consistently even spray pattern as low as 30cm, and far advanced spray drift control if the boom height rises. This is particularly important on undulating golf courses.

Syngenta XC Nozzle working

New nozzle technology has brought benefits for turf application with improved coverage, greater flexibility and notably reduced drift.

Easy to fit Spray Nozzle Height Indicators give you a constant visual check on the boom height.

Remember, always measure from the target to nozzle tip, not the actual boom; on some amenity sprayers that could be 10cm or more different.

Spraying winter greens is usually a consistent height, but remember for autumn applications of Rescue in rough, for example, the target grass leaves may be higher and the sprayer should be adjusted accordingly.

Get the right angle – Conventional flat fan nozzles tend to coat one side of a leaf with significantly more spray than the other; for winter contact fungicides that could mean areas of leaf left unprotected. Syngenta XC Nozzles are designed to deliver the spray pattern at an angle, set to compensate for the forward movement of the sprayer, to achieve better all-round coverage of a vertical leaf surfaces.

The XC Nozzles should be inserted into international standard sprayer bayonets*, fitted onto the boom with the ‘Syngenta’ facing forwards – so the spray pattern is delivered rearwards. 

*If you have a Hardi sprayer, a readily-available converter will be required to enable any industry standard nozzles – including XC Nozzles - to be used.

Select the right nozzle size - Part of the nozzle calibration process will include selecting the right size nozzle for the water volume required. Understanding the activity of the fungicide treatment being used can help fine-tune water volume requirements.

For purely contact winter fungicides it is essential to get good coverage and retention on the leaf. High water volumes or large droplet sizes have the risk of overwetting the leaf and rolling off. Reduced water volumes and the XC Nozzle spray pattern can increase the retention of spray on the leaf surface – and when you are spraying greens cut at 4mm height there is precious little target!

With the Contact+ Medallion TL, however, there is the further benefit of activity on disease spores in the thatch, so nothing is wasted if there is some movement of spray down the leaf.

If you are using a highly systemic fungicide with root uptake, whilst turf is still growing actively in the autumn, for example, then leaf coverage is less important as the fungicide will move around the plant to target disease ingress. Furthermore, the active will be picked up by the root and transported through the growing leaf to give prolonged protection.

In practice, for most greens’ applications an 025 nozzle gives the appropriate balance of water volume, operating pressure and speed. For larger areas, sprayed at higher speed, the 04 may be more applicable to achieve desired work rates. And for high water volume applications, where the intention is to get more spray don to the roots, an 08 nozzle could be used.

Greencast Turf App

The Greencast website and the GreenCast Turf App has output charts for all the XC Nozzle range, to help select the most appropriate settings.

Know your area – Accurate knowledge of the area to be sprayed is vital to calculate the amount of product and water volume required. If you are only selectively treating a few susceptible greens, for example, the individual areas must be known.

Commercial course surveying and mapping services are available, or they can be simply manually calculated with handheld GPS devices. Alternatively, areas can be calculated from Google earth images and free internet mapping software.

If you redesign or alter greens areas over the winter, don’t forget to adjust the spray records.

Asses risk and opportunity for application timing – Application timing is crucial to prevent damaging disease attacks and best protect turf quality – especially over the winter, when the effects of scars can last months before turf can be renovated and recover.

Local knowledge of disease incidence, the inspection of susceptible indicator greens and disease forecasting on the Greencast website can all help to optimise application timing, before the damage is done. In most instances, the aim is to treat as close as possible before infection occurs, to give the maximum protection through risk periods.

All fungicides work most effectively applied for proactive protection, before the symptoms of disease have caused damage and stress to turf plants. But, if some visible disease has occurred, some options, such as Instrata, do give greater kick-back activity to stop further development within the plant, as well as preventing new infection breaking out.

As well as assessing the risk of disease, you also need to balance the opportunities to spray. If you can foresee disease risk in few days, or you have a tournament that demands the highest quality, but the weather forecast warns you won’t be able to spray, earlier application may be timely.

The Greencast website combines diseases risk warnings, with spray window opportunities, to help best time your applications.

Furthermore, using low drift Syngenta XC Nozzles ensures there is more available spray days and times for treatment, typically three to four more days a month compared to conventional flat fan nozzles. 

Fill the sprayer carefully – It goes without saying that any spillages of concentrated chemicals are wasteful and, potentially, environmentally damaging. There are a few useful gadgets that could help minimise the risk. A metal sink and draining board mounted on a firm frame gives a stable platform to accurately measure chemicals into a jug; if you put a clean bucket under the sink plug hole and spillages can be washed down and added into the sprayer with no waste.

Be careful not to drop any pesticide container foil seals, which can contain traces of concentrate as point sources of contamination; the Syngenta S-Pac has been specifically designed to eliminate foils, to make them faster and safer to use.

Sprayers should always be filled in a designated area, where any spillage can be safely contained. It’s worth having a simple spillage kit on the sprayer, containing a bag of sawdust or highly absorbent cat litter to mop up any spills, along with a designated dustpan and brush and plastic bags that can be labelled and disposed of appropriately.

Also, don’t overfill the sprayer and risk spillage. Check around the induction hopper for any air leaks, since that can be the prime cause of foaming during the filling process. Be aware of poorly formulated products that can foam during filling and flow over.

Fitting a flow meter on the water inlet hose is an extremely accurate way to know precisely how much is in the tank, compared to a sight gauge. You can also get auto-cut off meters, so there is no risk of over filling if you get distracted.

You can use the free Greencast Turf App to calculate tank mix requirements and other application advice, as well as recording and reporting all your actions in one convenient and simple operation.

Clean out – If your calculations have been correct, and your application accurate, there should be little or no mix in the sprayer as you finish. Ideally, you would finish the last green at a slightly reduced application rate, wash out the sprayer and spray the rinsings back onto the final green to make up the full dose rate. Alternatively, spray the rinsings onto an untreated area.

Wash-off the outside of the sprayer on a designated area where ideally water can be collected and processed, or a designated grass area where there is no risk of drainage into water courses.

Sprayer set-up - Clean tank
Keeping the sprayer washed and clean - inside and out – makes it easier to check for potential problems.   

Containers should be triple washed to clean out fully, ideally before you have finished working so the contents can be added into the spray mix. A rinsing head in the sprayer induction hopper can be highly effective, but check all concentrate residues have been cleaned.

Record results – For a more effective Integrated Turf Management approach to disease control, it is important to record all your activities – such as mechanical operations, fertiliser inputs and top dressing as well as spray inputs - and the presiding weather conditions. You can use the GreenCast Turf App to record all this with a paperless system in one place that is quick, concise and available for easy reference.

Over time, it will enable you to better understand when disease is likely to strike on your course, and what actions or applications can best minimise the risk and the effects in developing an effective sustainable strategy for the future.

Spraying greens 1

When sprayers are well set-up and expertly operated the results will be consistently better for turf quality and environmental protection.